Keith Newman

  • Total activity 77
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 1 user
  • Votes 1
  • Subscriptions 50

Activity overview

Latest activity by Keith Newman
  • Keith Newman created an article,

    Can the Grizzl-E charger be mounted sideways or upside down

    The Grizzl-E charger is one solid piece so there is no issue mounting it upside down, sideways, or in any orientation. If outside, the waterproof rating of the enclosure cannot be guaranteed if the...

  • Keith Newman created an article,

    Can the Grizzl-E be Hardwired

    The Grizzl-E Level 2 EV Charger and Grizzl-E Smart charger are able to be hardwired. Look at Chapter 5 Wiring Connection in the User Manual for more information on how to hard wire the Grizzl-E. Ha...

  • Keith Newman created an article,

    2 Red Flashes - GFCI High Leakage

    A problem with continual tripping of 2 Red Flashes - GFCI High Leakage error has been identified in some Grizzl-E chargers.  This issue was caused by overly sensitive components that were wrongly t...

  • Keith Newman created an article,

    Does the Grizzl-E Charger use a Neutral Wire?

    The Grizzl-E Charger does not use a Neutral Wire and only uses L1, L2, Ground. The NEMA 14-50 plug has 4 pins one for neutral however this neutral wire has been terminated and is not used by the ch...

  • Keith Newman created an article,

    What Amperage should I set the DIP switches to?

    You should set the DIP switch amperage settings based on the rating of the circuit breaker rather than the vehicle.    The maximum current settings must be set to 80% of the circuit breaker rating ...

  • Keith Newman created an article,

    Order Doesn't Complete on grizzl-e.com

    If you are having trouble completing the order on grizzl-e.com below are a couple tips you could try Open a private window using Private Browsing Window in Safari Incognito in Google Chrome Priva...

  • Keith Newman created an article,

    No Light on Charger

    If the indicator light on the front of the Grizzl-E charger is not illuminated: Reset the breaker to check if the unit restores power. Check that there is power to the outlet/unit with a multimete...

  • Keith Newman created an article,

    What is the cable Length for the Grizzl-E Chargers

    The Input Cable - from the outlet to the charger - is 1.25 ft (0.38m)   The Output Cable - from the charger to the vehicle - is 24 ft (7.3m)   Cable length is regulated by UL and cannot be changed.  

  • Keith Newman created an article,

    Re-Connect Grizzl-E Smart to ChargeLab

    Note: This procedure is for Grizzl-E Smart units previously registered with ChargeLab. If you have not registered your unit with ChargeLab, use the Register and Connect Device to ChargeLab procedur...

  • Keith Newman created an article,

    Grizzl-E Smart Red Indicator Light

    When Grizzl-E Smart experiences an error, the indicator light will flash Red, and a beeping sound can be heard.  Grizzl-E Smart will flash and beep a certain number of times before pausing and rese...